E-Link LLEAP / Repeater
Industry leading ultra low latency millimeter-wave system most delay sensitive applications.

Key Specifications
Frequency Range | 71-76 GHz / 81-86 GHz |
Air Interface | FDD |
RF Channel Tuning | Frequency Agile in 62.5 MHz steps over band |
Transmit Power | +26 dBm (+0.5/-1.5 dB) |
Channel Bandwidth | 1000 MHz |
Modulation | QPSK |
Receiver Threshold(BER = 1×10-6) | -60dBm |
System Gain | 86 dB |
Latency | 41.5 ns/ODU, 83 ns/link |
Data Throughput Rate | 1.25 Gbps in 1+0 Configurations |
Antenna Diameter | 1 ft/30 cm | 2 ft / 60 cm | 3ft / 120 cm |
Mid-band gain | 45 dBi | 51 dBi | 54 dBi |
3 dB Beamwidth | 0.8° | 0.5° | 0.3° |
Total System Gain | 176dB | 187dB | 194dB |
Tributary Ethernet Interface | SFP, 1310nm, LC SFP, 850nm, LC |
Craft Interface | 10/100BaseTX |
Frequency Range | 71-76 GHz / 81-86 GHz |
Air Interface | FDD |
RF Channel Tuning | Frequency Agile in 62.5 MHz steps over band |
Transmit Power | +26 dBm (+0.5/-1.5 dB) |
Channel Bandwidth | 1000 MHz |
Modulation | QPSK |
Receiver Threshold(BER = 1×10-6) | -60dBm |
System Gain | 86 dB |
Latency | 41.5 ns/ODU, 83 ns/link |
Data Throughput Rate | 1.25 Gbps in 1+0 Configurations |
Highlights
- Transmit Power Output +26 dBm
- Frequency Agile tuning in 62.5 MHz steps with full band coverage
- Low Signal Receiver Threshold at -60 dBm for 1×10-6 BER
- E-Band Circular RF Antenna Interface
- Mid-Air Meet with E-Link 1000Q-FP
- Mid-Air Meet with E-Link 1000QR Repeaters
- PoE and Direct 2-wire Power connections
- All software and firmware licenses are included
- One-way latency of 83ns (Transmit through Receive)
Lowest latency wireless system in the Industry
The E-LINK LLEAP (Low Latency Enhanced Architecture Platform) is the highest power and lowest latency wireless system in the Industry. This new radio provides an additional 6 dB in system gain over the predecessor E-Link 1000Q-FP. This additional system gain may allow the user to drop an antenna size, improve link availability, or extend link reach.