Industry leading ultra low latency millimeter-wave system most delay sensitive applications.
|Frequency Band||71-76 / 81 – 86 GHz, FDD|
|RF Channel Bandwidth||1000 MHz|
|RF Tuning Options||Fixed or Frequency Agile|
|Transmit Power||+22 dBm (+1/-2dB)|
|Low Signal Sensitivity (1×10-6 BER)||-59 dBm|
|Minimum Link Range||50m|
|RF Configuration||1+0, 2+0|
|End Terminal Latency||40ns|
|Terminal Input Data Rate||1.25 Gbps (Ethernet)|
|Interface||SFP , 1310nm, LC SFP, 850nm, LC|
|PoE Input & DC Direct||48 VDC / 44W|
|Temperature Range||-45° C to +55° C -49° F to 131° F|
|Weight||8.5 lbs. 3.9 kg|
|Dimensions||286 mm x 295 mm x 79.4 mm 11.2 in x 11.6 in x 3.1 in|
|Craft Interface||Web Based UI|
|Antenna||1 ft / 30 cm – 45 dBi 2 ft / 60cm – 51 dBi 3 ft / 90 cm – 54 dBi|
|US||FCC 1.1310 RF MPE Linits FCC Part 101.111, Subpart Q IEC 60950-1, -22 IP67|
|Europe||EN 302 217-3|
- Spectrum efficient QPSK modulation
- Full-duplex wire speed L1 Gigabit Ethernet
- 2+0 RF configuration for 2x1000BaseX transport
- Rapid Field Replaceable unit with direct slip-fit antenna
- Up to four non-overlapping RF channels
- Typical link distances exceed 3 mi / 5 km for 99.99% availability
- Lightweight, small footprint, all outdoor design
- Transparently handles multi-media jumbo packets
- Rapid Port Shutdown
Low Latency 70/80 GHz Networks
E-Band Communications 70/80 GHz Ultra-Low Latency radio systems provide carrier-grade performance to Financial networks where latency is critical.
The E-Link radio system consists of terminals and digital regenerative repeaters. E-Link radios use QPSK modulation for increased spectrum efficiency providing up to four nonoverlapping channels for high-density link deployments in metropolitan networks.
The E-Link 1000Q family offers the highest system performance available, due to our exclusive Microwave Monolithic Integrated Circuit (MMIC) technology. This industry-leading technology provides higher throughput, longest link distances, superior reliability & faster ROI.